E-LINK-10M/100M is fiber media converter can fulfill converter 100Base-TX to 100Base –FX. It can expand the transmission distance to 0-120KM fiber network.The chassis type can insert 1 network management card and 16 function cards; can insert card of fiber Media converter, every card work separately. Supports power supply double backup.
nSupport IEEE 802.3ah, IEEE 802.3u, IEEE 802.3x, 100Base-TX and 100Base-FX standard.
nSupport 10/100M full/half duplex adapt also support compulsive set 10M/100M,full duplex, half duplex, then convenient to connect CPE and protect previous invest when network upgrades.
nRJ45 port parallel line and cross line.
nIntegration IC of fiber and electricity has good fiber characteristic and electricity characteristic then could ensure stable date transmission reliability.
nFailure pass mode (if need, please advise when order).when select such mode, local and remote could pass failure message automatically. If fiber and any link electricity port have fails, the whole link will be involved. When any failure link has recovered, the whole link will also recover. When 10/100M fiber media converter has connected to router, the router will update or recover function from the media converter status
nSupport hot-plug and could work (MIBF) over 70,000hours, satisfies telecom grade operate standard and
has full LED with complete work status.
nCould realize SNMP management and mib file, and install our 19inch 2U chassis.
nOAM 802.3ah the system is able to trigger the loopback function by enabling and disabling
nhave indicate OAM LED light for loopback
nUsed agrology theory, has fine radiation performance, and is convenient for uniform management and maintenance;
nFor chassis, Function cards support hot-plugging and each card realizes its corresponding function
Optical wavelength: single-mode1310nm/1550nm
Fiber: single fiber or double fiber for option
Transmitting consumption: -9dBm/-5dBm
Optical interface: SC/FC
Receiving and dispatching module: >-6dBm
Optical receiver receiving sensitivity: <-36dBm (BER<10-11)
Fiber circuit code: NRZ code
Transmit distance: Single-mode transmit distance 0~120km, Multi-mode 0~2km.
Support IEEE 802.3ah, IEEE 802.3u, IEEE 802.3x, 100Base-TX and 100Base-FX standard.
10/100Base-TX: UTP RJ45 connector
10/100Base-FX: FC, SC, MT-RJ or VF- 45connector
Working temperature: 0-65℃
Humidity: 5%-90% (no condensation)
Power supply requirement
DC input range DC-36V~DC-72V
AC input range AC180V~AC260V
Maximum input power of function card: DC5V/1A(5W)
Maximum output power of function card: 100W(4U), 150W(6U)
Largest quantity of power supply module: 2power supply modules
483×326×110(19 inch/2U) Chassis
212*138*30 (Mini Size) Standalone